object sprite

Ryex · January 26, 2008, 03:45:34 pm

What i need looks like this

But the dark gray needs to be an obsidian black glass color
And the movement animation should be a glare going across the rock. And the steps need to be a marble

Also the obsidian needs to have symbols etched in to it.

Can you guys make this?

Sally · January 26, 2008, 06:22:29 pm

I don't think i can, but how big do you wan't it?

Calintz · January 26, 2008, 06:26:43 pm

Hmm...
Can't see it.

Ryex · January 26, 2008, 06:50:35 pm

different host

i want the darker area to be about 96 pixles wide and about 128 pixels high the stairs can be any sixe you want as lon as they are porpotional and the same size each.

Calintz · January 26, 2008, 06:52:49 pm

What, you need a charaset for this...??
- What is it? A tombstone??

Ryex · January 26, 2008, 07:05:09 pm

the reason i need a chat set is because i need it to flash lik light moving across it.

no it is not a tomb stone it is a very powerful ariafact that marck the phyicale center point of all magig in a reality and act as a portle between the six and seventh reality.

if that did not make sence to you eather because of bad spelling or lack of explanation dont wory it will be explainded in the demo of my game which i need this for.

Calintz · January 26, 2008, 08:23:45 pm

I see...

Ryex · January 26, 2008, 10:17:05 pm

you know scrach teh anamation just make the first frame

Ryex · January 26, 2008, 10:20:56 pm

here is a good idea of what i want

Nortos · January 27, 2008, 05:33:04 am

is't around the size of a tombstone though? whats prospective size to a person in game?

Ryex · January 27, 2008, 08:49:02 am

twice as tall and about three times a wide not including the stairs

Calintz · January 27, 2008, 01:23:52 pm

I'll whip something up quick...

Ryex · January 27, 2008, 07:22:09 pm

thank you!

Calintz · January 27, 2008, 07:38:16 pm

Is the about the size you would want it??

Spoiler: Show

Ryex · January 27, 2008, 10:07:43 pm

no.. read the above descriptions the tomb stone area alone should be three RMXP tiles or 96 Pixles wide

Calintz · January 27, 2008, 10:09:17 pm

The tombstone is...I have to make it wider for the stairs...
How come you want it sooo big if it's just a tombstone anyway??

Ryex · January 27, 2008, 10:18:49 pm

Quote from: Calintz16438 on January 27, 2008, 10:09:17 pm
The tombstone is...I have to make it wider for the stairs...
How come you want it sooo big if it's just a tombstone anyway??

it is not a tomb stone I though I made the clear.... (see above)

and maby the image is larger than it looks but deffinitly make it taller and maby a bit wider

Calintz · January 27, 2008, 10:38:51 pm

What kind of symbols??
This is what I have so far...You want it, or improvement??

Spoiler: Show

Bigger?? >> Smaller??

Ryex · January 27, 2008, 10:49:32 pm

symbols? any randon junk you cant to put on there as lon as it IS NOT readable and in lines

did you shorten it? because I definitely want it taller that that but other that that it is fine

Calintz · January 27, 2008, 10:57:10 pm

Alright!!

Ryex · January 27, 2008, 11:08:03 pm

hurray the answer was correct!!!!

Calintz · January 27, 2008, 11:18:44 pm

I'll most likely have it sometime tomorrow...Getting late now

Ryex · January 28, 2008, 10:00:04 am

k thats fine with me

Calintz · January 28, 2008, 07:53:16 pm

umm...
Is the width about right?? Just need the height modified, and some ancient text on it?

Ryex · January 28, 2008, 09:43:57 pm

i was thinking that it could be a a tad bit wider after all it is a "very important artifact"

Calintz · January 29, 2008, 04:00:01 pm

Lol, so basically...You want this thing to be huge!!
-

Spoiler: Show

Ryex · January 30, 2008, 10:01:18 am

Um I think I said this a few times but it needs to be taller. Taller that it is wide like this. about the same aspect ratio too

Quote from: Ryex on January 26, 2008, 10:20:56 pm
Here is a good idea of what i want

Oh and can the bottom be flat with out rounded corners?

And I know this might be a bit picky but I don't really like the big blob looking symbols maybe hallow them out or something
also can it be glossy?

Calintz · January 30, 2008, 03:04:01 pm

.....
I'll see what I can do.

Ryex · January 30, 2008, 08:35:35 pm

thank you!

Calintz · January 31, 2008, 03:15:22 pm

Lol, you decided to make me work on this one

>> I thought I was gonna get away with just throwing some features into a rect. on PS, but I guess not!!

Ryex · January 31, 2008, 09:06:38 pm

lol! yes work!!!!!!!!!!!!!!!!! Work thy *^s off!!!

Vell · January 31, 2008, 09:25:42 pm

Ryex is a cruel master.

Calintz · January 31, 2008, 09:34:51 pm

Sounds it!!

Vell · February 01, 2008, 06:38:55 am

HE MAY BE A RINNE! I'LL CALL THE FLAMING HAIRED BURNING EYES TO HELP! lol, jk.

but your really doing an awesome job, and Ryex better be grateful for your hard work, especially when you have your own Sprites to do, and your own game to work on.

Calintz · February 01, 2008, 08:42:35 am

Thank you Ultaflame!

Ryex · February 01, 2008, 07:51:25 pm

don't worry i may make sarcastic jokes (eg. the one above

) but it is all in good humor I realy do apeisheat you helping me with this exspshualy sence my demo cant come out till it is done

Calintz · February 01, 2008, 08:10:05 pm

OH!!
So then it's a priority!!

Wow, I'm srry, I'll go work on it now

I didn't know that it was that important...
Are the symbols repressive or appressive?? >> Do you need the stairs on it?? Can't you just use the RTP set for that?

Ryex · February 01, 2008, 10:14:41 pm

It's not THAT important but yes I do neeed it done

Lets see the symboles are... wait repressive or appressive? I dont know what you mean like do they look agressive? no I'm thinging that they are more fluid and flowing kind of graceful.... That what you mean?

and you know you right I can use the RTP for the stairs! lol so leave those off for now

Calintz · February 02, 2008, 06:38:30 pm

Ok, I just meant to the symbols go in, or pop out?

Ryex · February 02, 2008, 07:54:13 pm

go in

Vell · February 02, 2008, 07:56:33 pm

some people are not familiar with terminology other might find obvious.

Calintz · February 02, 2008, 08:01:21 pm

Ok

Ryex · February 02, 2008, 08:07:37 pm

Actually I knew what he was saying but the "aggressive" trough me off! the proper term would probably be protrusive by I dont realy know

Calintz · February 02, 2008, 08:39:16 pm

Yeah, that would've been fine too, I said appressive, not aggressive

Ryex · February 02, 2008, 08:44:53 pm

You... Did...?

Oh... I cant read....

Calintz · February 02, 2008, 10:04:21 pm

Aww, don't wrry about it.

Ryex · February 04, 2008, 01:44:25 pm

sorry to seem impationt but can I get an estamit on when this could be done?

Calintz · February 04, 2008, 05:11:08 pm

umm...honestly I don't know!!

Ryex · February 04, 2008, 09:05:21 pm

A % done estamit?

Calintz · February 04, 2008, 09:16:41 pm

25...

Vell · February 04, 2008, 10:44:47 pm

it must be a tough sprite eh?

Calintz · February 04, 2008, 11:11:05 pm

eh...
Honestly, I just haven't been working on it that much. I could probably have it completed in an hr or so, as long as I work on it.

Vell · February 05, 2008, 06:42:13 am

lol. well, get it doen when you do, I think Ryex can wait.

hopefully.

Ryex · February 05, 2008, 01:08:36 pm

truth be told I can but I was serious when I said I cant get may demo out till it is done

Ryex · March 13, 2008, 08:01:02 pm

Have I Been Forgoten!!!!!!!!!!!!!!!!!!!!!

Sase · March 17, 2008, 08:53:22 am

This stuff is great you know

I laughed the whole time reading.
I really hope you'll get your sprite

Ryex · March 20, 2008, 07:00:45 pm

Well I'm glad someone can find humor at our exspence!

nathmatt · March 30, 2008, 09:03:20 am

i dont know if ur still looking sor this but how about somthing like this

Spoiler: Show

Ryex · May 30, 2008, 03:47:41 pm

lol i can't believe i didn't notice your post till now1

this would work if it could be reworked to a glossy black finish I want it to look like obsidian (volcanic glass) this etch runes in to the center

I don't know if you personally could do it so I'm not asking you but maybe some one else could if they are looking at this topic..

hint hint

Sally · May 30, 2008, 04:33:31 pm

i think someone will also have to make it look better its very pixely...

Calintz · June 12, 2008, 08:09:35 pm

Wow...
I'm still gonna power you up nathmatt.

Being a spriter myself, I understand how hard it is to make sprites of that proportion.

Ryex · June 18, 2008, 11:51:27 am

wait... Did you MAKE that nathmatt?

If you did thats incredible I've never seen so one go to that much trouble to help out a request that they were not filling!

I'm sorry I didn't realize sooner that you had made that sprite

Calintz · June 18, 2008, 02:58:06 pm

Maybe he didn't, I don't know. I thought he did.

nathmatt · November 13, 2008, 01:51:55 pm

actually i just inlarged the tome stone sprite & cleared the middle of it hence the pixle look

Calintz · January 11, 2009, 03:24:48 pm

Well...
That's good enough in my book, Lmao

Frankenspriting =)

object sprite

January 26, 2008, 06:22:29 pm #1

January 26, 2008, 06:26:43 pm #2

January 26, 2008, 06:50:35 pm #3 Last Edit: January 26, 2008, 06:51:34 pm by Ryex

January 26, 2008, 06:52:49 pm #4

January 26, 2008, 07:05:09 pm #5 Last Edit: January 26, 2008, 07:06:03 pm by Ryex

January 26, 2008, 08:23:45 pm #6

January 26, 2008, 10:17:05 pm #7

January 26, 2008, 10:20:56 pm #8

January 27, 2008, 05:33:04 am #9

January 27, 2008, 08:49:02 am #10

January 27, 2008, 01:23:52 pm #11

January 27, 2008, 07:22:09 pm #12

January 27, 2008, 07:38:16 pm #13

January 27, 2008, 10:07:43 pm #14

January 27, 2008, 10:09:17 pm #15 Last Edit: January 27, 2008, 10:10:35 pm by Calintz16438

January 27, 2008, 10:18:49 pm #16

January 27, 2008, 10:38:51 pm #17 Last Edit: January 27, 2008, 10:44:16 pm by Calintz16438

January 27, 2008, 10:49:32 pm #18

January 27, 2008, 10:57:10 pm #19

January 27, 2008, 11:08:03 pm #20

January 27, 2008, 11:18:44 pm #21

January 28, 2008, 10:00:04 am #22

January 28, 2008, 07:53:16 pm #23

January 28, 2008, 09:43:57 pm #24

January 29, 2008, 04:00:01 pm #25 Last Edit: January 29, 2008, 04:11:44 pm by Calintz16438

January 30, 2008, 10:01:18 am #26 Last Edit: January 30, 2008, 10:06:19 am by Ryex

January 30, 2008, 03:04:01 pm #27

January 30, 2008, 08:35:35 pm #28

January 31, 2008, 03:15:22 pm #29

January 31, 2008, 09:06:38 pm #30

January 31, 2008, 09:25:42 pm #31

January 31, 2008, 09:34:51 pm #32

February 01, 2008, 06:38:55 am #33

February 01, 2008, 08:42:35 am #34

February 01, 2008, 07:51:25 pm #35

February 01, 2008, 08:10:05 pm #36 Last Edit: February 01, 2008, 09:06:23 pm by Calintz16438

February 01, 2008, 10:14:41 pm #37

February 02, 2008, 06:38:30 pm #38

February 02, 2008, 07:54:13 pm #39

February 02, 2008, 07:56:33 pm #40

February 02, 2008, 08:01:21 pm #41

February 02, 2008, 08:07:37 pm #42

February 02, 2008, 08:39:16 pm #43

February 02, 2008, 08:44:53 pm #44

February 02, 2008, 10:04:21 pm #45

February 04, 2008, 01:44:25 pm #46

February 04, 2008, 05:11:08 pm #47

February 04, 2008, 09:05:21 pm #48

February 04, 2008, 09:16:41 pm #49

February 04, 2008, 10:44:47 pm #50

February 04, 2008, 11:11:05 pm #51

February 05, 2008, 06:42:13 am #52

February 05, 2008, 01:08:36 pm #53

March 13, 2008, 08:01:02 pm #54

March 17, 2008, 08:53:22 am #55

March 20, 2008, 07:00:45 pm #56

March 30, 2008, 09:03:20 am #57

May 30, 2008, 03:47:41 pm #58 Last Edit: May 30, 2008, 03:54:16 pm by Ryex

May 30, 2008, 04:33:31 pm #59

June 12, 2008, 08:09:35 pm #60

June 18, 2008, 11:51:27 am #61

June 18, 2008, 02:58:06 pm #62

November 13, 2008, 01:51:55 pm #63

January 11, 2009, 03:24:48 pm #64