Print Page - ALT Codes in RMXP

Title: ALT Codes in RMXP
Post by: mineox100 on March 12, 2012, 10:03:53 am

So does anyone know how to use the alt codes characters below in RMXP's "Show Text" command?
Thanks.

Characters: ▲, ▼, ¶, ◄, ▐, etc.

Title: Re: ALT Codes in RMXP
Post by: Blizzard on March 12, 2012, 11:45:25 am

▲
▲▲

Seriously, though. This should actually work right off the bat. If you can't enter them directly, you can copy-paste them. Also, make sure the font you are using actually supports these characters. If you go with Arial, everything should be fine.

Title: Re: ALT Codes in RMXP
Post by: MarkHest on March 12, 2012, 11:49:23 am

There's altso this one, if you're interested:

http://forum.chaos-project.com/index.php?topic=2956.0

Title: Re: ALT Codes in RMXP
Post by: G_G on March 12, 2012, 04:12:58 pm

That was one of the most worthless scripts I have ever created. -_- I am not proud of that one bit.

Title: Re: ALT Codes in RMXP
Post by: stripe103 on March 12, 2012, 05:07:25 pm

As long as you're not ashamed over it.

Title: Re: ALT Codes in RMXP
Post by: ForeverZer0 on March 12, 2012, 05:11:55 pm

If you want to check a font and see if the character exists or a code, type "charmap" in either the Start menu search box or Run box.

Chaos Project

RPG Maker => General Discussion => Topic started by: mineox100 on March 12, 2012, 10:03:53 am