Author Topic: Public RMXOS  (Read 3622 times)

Offline whitespirits

  • Ethereal Devastator
  • ****
  • Posts: 328
  • LV: 2
    • View Profile
Public RMXOS
« on: February 02, 2014, 08:13:55 PM »
Hi guys so few years ago i was able to set servers up and since then have gotten abit rusty! So i remeber using DYNDNS were i could use my ip address under a domain example, since I have checked the site and now it is all paid! so i thought i would use my ip address without the use of dns, but then the server wont start and how am i able to login when the ip address is not local?

(click to show/hide)

I may have fixed this!
« Last Edit: February 02, 2014, 08:42:01 PM by whitespirits »

Offline WhiteRose

  • Trying to code in Ruby
  • Moderator
  • Lexima Warrior
  • ***
  • Posts: 2339
  • LV: 127
  • Gender: Female
  • <3
    • View Profile
Re: Public RMXOS
« Reply #1 on: February 03, 2014, 12:05:31 AM »
I'm glad you got it figured out! In most things that require a public IP, what you really need is your public IP address, not your internal network address. Anything that starts with 192.168 is usually an internal IP. You can find your public IP on websites like If you're using a router, you'll need to set up port forwarding as well. The way that you do that is different depending on the router, but it's usually pretty simple.

Anyway, I know you figured it out, but I figured I'd give some pointers in case someone else comes into this thread with the same problem later. :)