[XP] Tons of Add-ons

[G_G]

Being snowed in gives you a lot of free time. xD Here ya go Mark. Find the add-on in the original part 1 and replace it with this.

#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
# Animated Battlers for Non-Action BS by Blizzard
# Version: 1.3b
# Type: Battle Graphic Improvement
# Date: 5.5.2007
# Date v1.3b: 13.8.2007
#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=
# 
# new in v1.3b:
#   - fixed the flicking glitch that appeared when a battler was dying
#   - improved coding, now executed over Sprite_Battler instead of
#     Spriteset_Battle and due to that increased compatibility and shorter code
# 
# 
# Compatibility:
# 
#   95% compatible with SDK v1.x. 70% compatible with SDK v2.x. Not compatible
#   exotic action CBS-es that need special battler animation.
# 
# 
# Explanation:
# 
#   This will animate battlers in the default battle system. To animate them,
#   you MUST HAVE the appropriate picture files. You can name them however you
#   like, but you need to give them numbers. Every other frame than the first
#   has to have a number higher than the one before. If one number is skipped,
#   the animation will loop until it reaches the highest number available
#   before the skipped number. Not that this works for actors AND for enemies.
# 
# Examples:
# 
#   1)
#   Arshes.png
#   Arshes1.png
#   Arshes2.png
#   Arshes3.png
#   - all frames will be shown
# 
#   2)
#   Arshes.png
#   Arshes1.png
#   Arshes3.png
#   Arshes4.png
#   - only the 1st and 2nd frame will be shown
# 
#   3)
#   Arshes.png
#   Arshes3.png
#   Arshes4.png
#   Arshes5.png
#   - no animation at all
#:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=

#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
# START Configuration
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

# how many REAL frames that should be skipped before updating the battlers,
# note that using anything below 2 is not recommended and that using low values
# can increase lag dramatically
B_SPEED = 4
# Now you can define speeds for each individual actor/enemy!
A_SPEEDS = {
  1 => 6,
  # actor_id => speed,
}
E_SPEEDS = {
  1 => 8,
  2 => 10,
  # enemy_id => speed,
}

#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
# END Configuration
#::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

#==============================================================================
# Game_Battler
#==============================================================================

class Game_Battler
  
  attr_accessor :frame
  attr_accessor :max_frame
  attr_accessor :origin_name
  attr_accessor :battler_name
  
  def get_speed
    speed = self.is_a?(Game_Enemy) ? E_SPEEDS[self.id] : A_SPEEDS[self.id]
    return speed == nil ? B_SPEED : speed
  end
  
end

#==============================================================================
# Sprite_Battler
#==============================================================================

class Sprite_Battler
  
  alias upd_animated_battlers_dbs_later update
  def update
    if $game_system.ANIBATTLERS_NON_ACTION_BS && @battler != nil
      setup_battler if @battler.origin_name != @battler.battler_name
      if Graphics.frame_count % @battler.get_speed == 0
        @battler.frame = (@battler.frame + 1) % @battler.max_frame
      end
      if @frame != @battler.frame
        @frame = @battler.frame
        name = @battler.origin_name
        name += @frame.to_s if @frame > 0
        self.bitmap = RPG::Cache.battler(name, @battler.battler_hue)
        @width = bitmap.width
        @height = bitmap.height
        self.ox = @width / 2
        self.oy = @height
      end
    end
    upd_animated_battlers_dbs_later
  end
  
  def setup_battler
    @battler.origin_name = @battler.battler_name
    @battler.frame = @frame = 0
    @battler.max_frame = 1
    loop do
      name = @battler.origin_name + @battler.max_frame.to_s
      if FileTest.exist?("Graphics/Battlers/#{name}.jpg") ||
         FileTest.exist?("Graphics/Battlers/#{name}.png")
        @battler.max_frame += 1
      else
        break
      end
    end
  end
  
  def setup_battleback
    @battler.origin_name = @battler.battler_name
    @battler.frame, @frame, @battler.max_frame = 0, 0, 1
    name = @battler.origin_name + @battler.max_frame.to_s
    while FileTest.exist?("Graphics/Battlers/#{name}.jpg") ||
          FileTest.exist?("Graphics/Battlers/#{name}.png")
      @battler.max_frame += 1
      name = @battler.origin_name + @battler.max_frame.to_s
    end
  end

end

[MarkHest]

Tested and working! Thanks man, you rock! 

[Shalaren]

Hey just a quick question.
I want to use these states, but how to I determine which state is going to have this effect?
I'm trying to look for how to configure it but all I can find it setting it as true or falls.
is it already set up for a certain State ID? or do I need to set it up somehow?

[WhiteRose]

Hey just a quick question.
I want to use these states, but how to I determine which state is going to have this effect?
I'm trying to look for how to configure it but all I can find it setting it as true or falls.
is it already set up for a certain State ID? or do I need to set it up somehow?

Each add-on has its own configuration. After turning it to true on the top, scroll down to the actual code for that add-on, and you'll see an additional configuration section where you can set up which states have this effect, and so on.

[firevenge007]

I've been trying to utilize these add-ons, but whenever I go to an old game, it pops up with an error and crashes, or whenever I press F12, so that it instantly goes back to the main menu, it pops up with an error and crashes.

Why is this happening?

[Blizzard]

Compatibility

90% compatible with SDK v1.x. 80% compatible with SDK v2.x. Some add-ons will corrupt your old savegames. If you experience the "Stack level too deep" error, you might already use one of these add-ons. All of these add-ons here work with each other with a success rate of 99%. This add-on collection itself WILL corrupt your old savegames.

EDIT: TO fix the F12 thing, put this above all your other scripts:

if $game_exists
  Thread.new {system('Game')}
  exit
end
$game_exists = true

This script has to stay the topmost script, no matter what.
The crash happens because of a problem in RMXP when using aliasing of already existing methods to improve compatibility between scripts.

[firevenge007]

but it's only in old loaded games that this happens. If I start a new game, all of the add-ons are there.

[KK20]

This add-on collection itself WILL corrupt your old savegames.

I don't know how we can make this any clearer. The reason is due to a variable not being initialized when called upon. Starting a new game will initialize the variable and the game knows it exists. Loading an old game SKIPS this initializing process and the game DOESN'T know the variable exists.

In short, if you wish to use Tons, you will have to delete your 'old loaded games'.

[firevenge007]

I'm making this game for a friend though, and he's already done so much in the game, and I thought there might be a way to have it able to work without him starting all over again.

[Blizzard]

There technically is, but it would require too much editing of all the scripts.

[LiTTleDRAgo]

you can try to dismantle it if you're only using specific add-on

[firevenge007]

So could I, for example, take out one utilization of the script, like HUD, and come into contact with no problems?

I tried it with the map names and I just wrote "when x then name = nil" where x -> (1,300) so that it would display all my map's names every time you would walk into them, but it had an error.

[LiTTleDRAgo]

try this edited version

_http://pastebin.com/NbPUT512
_http://pastebin.com/aUF3zSJN
_http://pastebin.com/wLHtjCZx

[firevenge007]

Thank you for helping me, but when I try to run, it says "Script ' ' line 2887: NoMethodError occurred. Undefined method 'each' for nil:NilClass

[LiTTleDRAgo]

try redownload the script (all of them)

edit : it seems I have a trouble with my connection, the script got cut out

*fixed*

[firevenge007]

I get "Script ' ' line 2608: TypeError occurred. No implicit conversion from nil to integer."

[LiTTleDRAgo]

what script did you use, can you pm me the script.rxdata?

[firevenge007]

I used all 3, but when I don't even touch any of them, it automatically redirects me to that line in the 1st script.

[PhoenixFire]

I actually feel like this is probably an obvious answer, but I'm trying to use the fullscreen script. I have it enabled, and I don't see any configuration options that make much sense. It doesn't ask if you want to play in full screen, so, I'm obviously doing something wrong    help?

[KK20]

There is no configuration required for that. From what I can guess, you might have a script below Tons that rewrites Scene_Title rather than aliases it.